The Protecta III is a proven and reliable T8 fluorescent luminaire. The Protecta’s rugged, corrosion resistant construction (IP66/IP67) combined with an advanced high frequency ballast ensure minimum product maintenance is required. When access is required the Protecta III features an easy access clamp bar and automatic lamp de-energisation.
Simple rugged construction;
Advanced control gear gives 50/60Hz operation, high power correction factor and regulated lamp output that is 20% greater at -20°C than competitors;
Resistant to voltage fluctuations;
Dc operation;
Quick release mains terminals;
DTS-01 deluge tested;
Vibration tested to comply with Lloyds/DNV;
End of life (EOL) protection to IEC 60079-7;
The Protecta III hazardous area Ex e fluorescent luminaire is designed for use in Zone 1 areas.
Luminária Fluorescente 2x18W 220-254V Zona 1 e 21 Ex-e IP66/67 50/60Hz
Technical Specification
Lamp: 2x18W;
Screwed connection terminal block (up to 6mm² conductors);
Lamp Holder: T8;
ATEX Classification: Group II Category 2 GD
Material – Body: GRP body with polycarbonate cover and brass suspension points;
Type: Linear;
Certified Listed: ATEX;
Hazardous Rating(s): Zone 1 & 21;
IP Rating: IP66/ IP67.
Measures:
Weight (kg): 5.9000
Thickness (cm): 14.7000
Width (cm): 20.9000
Length (cm): 74.2000
